Log in or sign up
Map reading: basics

Parts of a Map: Title, Legend, Scale, North Arrow and Grid

What are the parts of a map? Title, legend, scale, north arrow and grid explained, with a table and a worked scale example.

Updated: November 15, 2026

A map consists of the map image itself plus a set of standard elements around it: a title, a legend, a scale, a north arrow, a coordinate grid and marginal information. Together they tell you what you are looking at, how large it is, which way north lies and how to name an exact location. If you know these parts, you can read almost any map, even one you have never seen before.

Overview: what is where and what is it for?

ElementWhat it isWhat you use it for
TitleThe name of the map or map sheet, often with a sheet numberChecking that you have the right map and area
Legend (key)An explanation of symbols, colours and line typesKnowing what a symbol means
ScaleThe ratio between map and ground, as a number (1:25,000) and as a scale barMeasuring and estimating distances
North arrowAn arrow or diagram showing the direction of northOrienting the map and using a compass
GridA network of numbered lines over the mapNaming or finding a place by coordinates
Marginal informationDetails in the map border: publication date, projection, contour intervalJudging how current and accurate the map is

Title and sheet number

The title names the area, for example a town or the name of a map sheet. Topographic maps usually add a sheet number so you can find the neighbouring sheet when your route crosses the edge. Check the publication year as well: a map that is twenty years old may be missing new roads, housing estates or forest.

The legend: the key to the symbols

The legend shows what each symbol, colour and line style stands for. A dashed line might be an unpaved track, a thick red line a main road and a blue area water. Because mapmakers follow different conventions, it pays to read the legend before you set out, even if you think you know the symbols. On a digital map the legend is often behind a button or changes with the zoom level.

Scale: from map to ground

The scale links a distance on the map to the same distance on the ground. It usually appears in two forms:

  • A representative fraction, such as 1:25,000. One unit on the map equals 25,000 of the same unit on the ground.
  • A scale bar, a graduated line labelled in metres or kilometres. It stays correct when the map is enlarged or reduced, whereas the ratio does not.

Worked example (fictional): on a 1:25,000 map you measure 6 cm between two points. 6 × 25,000 = 150,000 cm, which is 1,500 m or 1.5 km in a straight line. On a 1:50,000 map the same 6 cm would be 3 km. The smaller the second number, the larger the scale and the more detail you see.

North arrow and declination

The north arrow points to the north of the map. Usually the top of the sheet is north, but always check. Many topographic maps show a diagram with several arrows: grid north (the direction of the vertical grid lines), true north (towards the geographic North Pole) and magnetic north (where a compass needle points). The angle between true and magnetic north is called magnetic declination. It differs from place to place and changes slowly over time, so read the current value from an up-to-date source.

The grid: coordinates on the map

The grid is a network of parallel lines crossing at right angles, with numbers along the edge. Reading the numbers of one vertical and one horizontal line fixes a position. Several systems exist: latitude and longitude, UTM and MGRS, or national grids. On a map with a kilometre grid the squares are 1 by 1 km, which is handy for quick distance estimates and for passing on a location verbally.

Marginal information: the small print that matters

The border holds details that are easy to skip but often decisive:

  • the contour interval: the height difference between two contour lines;
  • the projection and coordinate system, needed if you want to transfer a GPS position to paper;
  • the publication and revision date;
  • the sheet index showing the neighbouring sheets.

In MilMap

The digital map shows the same elements: a scale bar that follows your zoom level, a map grid with MGRS coordinates that you can display and enter offline, and a compass with magnetic declination. That lets you see straight away how your live position relates to the grid.

Checklist before you set off

  1. Check the title, sheet number and year.
  2. Read the legend for the symbols you will need.
  3. Note the scale and verify one known distance.
  4. Find the north arrow and the declination.
  5. Check which coordinate system the grid uses.

Try it in MilMap

Open topographic maps, plan routes and take your map offline with MilMap.

Or download the app

Frequently asked questions

Which parts must a map have at minimum?

A title, a scale, a legend and an indication of north. For maps used to pass on a location, a coordinate grid is added.

What is the difference between a representative fraction and a scale bar?

The ratio (for example 1:25,000) is a number that stops being valid once the map is enlarged or reduced. A scale bar resizes with the map, so it stays correct on a printout or a zoomed screen.

Why do some maps show three north arrows?

They show grid north, true north and magnetic north. The difference between the last two is magnetic declination, which you must account for when working with a compass.

Is the top of a map always north?

Usually, but not always. Check the north arrow or the grid lines instead of assuming.

Sources and disclaimer

  • General map-reading knowledge, in my own words.
  • The worked example is exact (6 cm at 1:25,000 = 1,500 m) but fictional.