Basics: the compass

The Parts of a Compass

All parts of a baseplate compass explained: needle, bezel, direction-of-travel arrow, index line and more. With a part-to-function table.

Updated: November 12, 2026

A baseplate compass consists of a transparent baseplate, a rotating bezel marked in degrees and a magnetic needle; together they let you measure, set and follow a direction. Knowing the parts and what each does makes you faster with the compass and less prone to mistakes.

Overview: part and function

PartFunction
BaseplateTransparent straight plate you lay on the map along a line between two points.
Direction-of-travel arrowArrow on the baseplate that points in the direction you walk or sight.
Rotating bezel (housing)Ring marked 0 to 360 degrees on which you set a bearing.
Index lineMark at the edge of the housing where you read the bearing.
Magnetic needleFreely turning needle; the red end points to magnetic north.
Orienting arrowFixed arrow inside the bezel in which you place the red end of the needle.
Orienting linesParallel lines inside the bezel that you align with the north-south lines on the map.
ScalesRuler in mm or cm along the edge, or special scales for common map scales such as 1:25,000.
Magnifier and lanyard holeFor reading small map details and for carrying the compass on a cord.

The baseplate and direction-of-travel arrow

The baseplate is transparent so you can see the map beneath it. Its long edge works as a ruler: lay it from your position to your destination and the direction-of-travel arrow automatically points the right way. Many compasses also carry a scale along the edge, so you can turn a distance on the map straight into metres on the ground.

The bezel and the needle

The bezel turns with some resistance around the housing, which is filled with liquid to settle the needle quickly. The scale runs from 0 to 360, where 0 is north, 90 east, 180 south and 270 west. The red end of the needle always points to magnetic north. The needle turns freely, so keep the compass level: one held at a tilt can catch.

Orienting arrow and orienting lines

These two parts are fixed to the rotating bezel. You line the orienting lines up parallel with the map's north-south lines, and the orienting arrow then points to map north. In the field you turn yourself until the needle lies in the orienting arrow, and then the direction-of-travel arrow points along your bearing.

Useful extras

  • Declination adjustment: some compasses let you preset the declination, so you do not have to add or subtract it yourself.
  • Clinometer: measures the angle of a slope, useful in mountain terrain.
  • Luminous marks: make reading possible in the dark.
  • Mirror (mirror compass): you sight over the edge and read the bezel at the same time, which makes accurately sighting a distant object easier.

Care and checks

  • Do not put the compass next to a phone, magnet or steel object; that can deflect or even reverse the needle.
  • Check that there is no significant air bubble in the housing and that the needle turns smoothly.
  • Test the compass now and then in a spot without interference, for example against a known direction on the map.

How the parts work together

Taking a bearing is really a short sequence: baseplate along your route, turn the bezel until the orienting lines match, read the bearing at the index line. Following a bearing is the reverse: leave the bezel on the bearing, put the needle in the orienting arrow and follow the direction-of-travel arrow. Practise this first on familiar ground, so each part falls into place naturally before you really need it.

In MilMap

MilMap shows your position live on the map and gives the magnetic declination for your location, so you can convert map bearings to compass bearings. The app does not replace your compass, but it helps you understand the parts and your bearing and plan the route offline.

Frequently asked questions

Which end of the compass needle is north?

On most compasses the red end points to magnetic north. Check this for your model, as colours can differ.

What is the index line for?

It is the mark at the edge of the housing where you read the degrees of a set bearing.

What is the difference between a baseplate compass and a mirror compass?

A baseplate compass is ideal for working with a map. A mirror compass has a hinged mirror that lets you sight a distant point more accurately.

How do I check that my compass still works?

Hold it level, away from metal and electronics, and see whether the needle swings smoothly and quickly to a steady direction. Compare it with a known direction.

Sources and disclaimer

  • General knowledge of the baseplate compass, in our own words. Names can differ slightly between manufacturers.