To navigate with a map and compass you do three things: orient the map, take a bearing from where you are to where you want to go, and follow that bearing on the ground. It needs no battery, no signal and no GPS, which is why it remains the core skill for every hiker, scout and navigator.
What you need
- A map with a grid or at least a clear north direction, ideally a topographic map.
- A baseplate compass with a rotating bezel, direction-of-travel arrow and orienting lines.
- The map scale and the magnetic declination of the area. Both are printed in the map margin.
Step 1: orient the map
An oriented map lines up with the terrain: what is on your left on the map is on your left in the field. Place the compass flat on the map with its long edge along a north-south grid line and the direction-of-travel arrow pointing up the map. Rotate map and compass together until the red end of the needle sits inside the orienting arrow, allowing for declination (see below). Your map now matches the world and you can point out landmarks such as a church tower, an embankment or a forest edge.
Step 2: take a bearing from A to B
- Lay the long edge of the compass on the map from your position A to your destination B, with the direction-of-travel arrow pointing towards B.
- Turn the bezel until the orienting lines inside it are parallel to the north-south lines on the map, with the orienting arrow pointing to map north.
- Read the bearing at the index line. That is your map bearing in degrees, from 0 to 360.
- Correct for declination to convert the map bearing to a magnetic bearing.
Step 3: follow the bearing
Hold the compass level in front of you, away from metal and electronics. Turn your whole body until the red end of the needle sits exactly in the orienting arrow ("red in the shed"). The direction-of-travel arrow now points along your bearing. Pick a distinct object in that line, such as a tree or a post, walk to it and repeat. That way you do not stare at the compass all the time, and you walk straight even when visibility is poor.
- Track distance by pacing or time. As a rule of thumb, people walk roughly 4 to 5 km/h on flat ground, slower on rough terrain.
- Where possible pick a catching feature, such as a road, stream or railway running across your line, so you know when you have gone too far.
Declination in short
The needle points to magnetic north, but the map is drawn to grid or true north. The difference is magnetic declination. If magnetic north lies east of map north, you subtract the declination when you transfer a map bearing to the field; if it lies west, you add it. Declination changes slowly over the years, so always check the current value in the map margin or a source with recent data.
A worked example (fictional)
Say your map bearing is 80 degrees and the declination is 3 degrees east. The magnetic bearing is 80 - 3 = 77 degrees. Set 77 at the index line and follow it in the field. Over 2 km a 3-degree error shifts you about 100 m sideways, so the correction really matters.
In MilMap
MilMap shows your live position on the map and calculates the magnetic declination for your location. Plan a route with waypoints, check distance and elevation profile, and take the map offline with you. Use the app as a complement to a physical compass, not as your only tool: a battery can run out, a compass cannot.